NEWS

gnzj63-3 mud cleaner.jpg
September 08 2010

GNZJ63-3 Mud Cleaner for petroleum drilling solids control to Indonesia

Last month we shipped a GNZJ63-3 Mud Cleaner for petroleum drilling solids control to Indonesia.

Main features of GNZJ63-3 Mud Cleaner:

1 With a 240m3/h flow rate, it is composed of 2x 12” desander cone and 12x 4”desilter cone.

mud decanter centrifuge
August 24 2010

Decanter Centrifuge and Vertical Centrifugal pump to Beijing

Decanter centrifuge and vertical centrifugal pump is very important centrifual parts of sodlis control system, while the vertical centrifugal pump i.e. submersible slurry pump is used to supply the drilling mud to decanter centrifuge. After bought a double shale shaker and a mini mud cleaner, they purchase more now. As more and more old clients repurchase our products,  it proves our ability and good quality of our products.

Decanter centrifuge are used to extract (dewater) solid materials from liquids when they are mixed together in slurry. LW series is a normal decanting centrifuge mode of our company,GN Solids Control based in China manufacture and supply complete line of high-speed, variable-speed and fully variable-speed decanting centrifuge for handling drilling fluids Centrifugal pump is also called sand pump,GN Solids Control supply centrifugal pump from our China factory.Get centrifugal pump at Best price,Fast service.

thailand parts of  poor boy degasser
August 18 2010

Poor boy degasser customized design for Thailand client

Just on Monday we delivered poor boy degasser, vacuum degasser, centrifugal pump, mud mixer to Thailand. Pleased to say, they are GN repeat customer in Thailand.The poor boy degasser usually used in deep oilwell drilling it is also named as "Mud gas separator". This Thailand customer is an oilwell drilling services company they has special requirements on the poor boy degasser. They use the poor boy degasser in 800bbl total treating capacity system. They requested the vessel diameter should be 36". A ladder on the side also need a 10ft U-Tube at least. The U-Tube is related with liquid seal or mud leg. At maximum capacity, naturally more internal pressure will be created causing chance of overcoming liquid seal (mud leg). On the other hand when the unit is handling very little fluid, there is less possibility of overcoming the mud leg. They requested 10ft U-Tube is more appropriate for their actual requirements on the degasser( 220~300m3/h) for the whole mud system treating capacity.

500gpm drilling fluids system
July 31 2010

GN 500 GPM no dig drilling fluids cleaning system to CPP

Another 2 sets no dig drilling fluids cleaning system to CPP,GN Solids Control have sent more then 10 sets mud recycling system to China biggest HDD contractor CPP.We can provide single mud recycling unit or unit with both recycling and mixing.For CPP system,they only chose to have recycling function.

petroleum solids conrol system
July 24 2010

XJ550 HP Workover Rig Petroleum Mud System to Kazakhstan

Another 2 Sets XJ550 HP Petroleum Workover Drilling rig solids control mud system are finished within 40 days ready for delivery to Kazakhstan.These 2 mud system is capable to work for temperature -30℃ to 55℃,there are heating pipelines for hot stream circulation around the mud tanks.GN also offered customized design according to client's requirement for lower height of the Shaker.GN install the Shaker directly to the mud tank withough Skid.

XJ550 HP Workover Rig Mud System General Specs.1)Treating Capacity up to 160m3/h.(700GPM)2)Mud Tank Capacity:146m3(890BBL)3)Effective Mud Capacity:105m3(660BBL)4)Mud Tank Dimensions:10500mm L×2300mm W ×1500mm H